Remote control details

Discussion of Argus4 cameras.

Current users seeking advice from members with a background in thermal imaging welcome here
Post Reply
Fraser
Posts: 19
Joined: Sun Mar 06, 2016 11:14 pm

Remote control details

Post by Fraser » Sun Apr 17, 2016 1:52 pm

The remote control is the Philips IR remote RC5 or RC6 protocol. A simple universal remote control will work fine. E2V Argus helpfully decided to use a standard protocol and buttons. They even used relabelled universal remote controls themselves. A good cost saving for production. The One for All series product code is 11233.

On an Argus 4 the following buttons apply. Check the manual for further details.

Power is the Menu activation
Ch up is Menu up
Ch down is Menu down
Vol down is -
Vol up is +
Mute is OK and Delete

Fraser

Post Reply