System Requirements
Requires PC with :
- Operating System:
Windows® NT (all versions).
Windows® 2000 service pack 3 or newer.
Windows® XP (all versions).
The Argus®3 software will also normally install and run with Windows® 95, 98 or ME. However some problems may arise with older versions
of these operating systems and as Microsoft no longer supports these operating systems, e2v technologies cannot provide full
support for them.
If the laptop/PC is running Windows® 2000 with an unsupported service pack,
visit the Windows® update web page at http://v4.windowsupdate.microsoft.com/
en/default.asp. Click on the search button and insert the service pack update
required. Follow the on-screen information.
- 9 pin D connector serial port.
- Minimal processor and memory requirement over operating system
If your PC has a 25 pin D connector serial port an adaptor is required. These are readily available from your local computer store.
If your PC only has USB connectivity, a serial port adaptor is required. Again these are readily available from your local computer store.
Installing the Software
Click on the icon on the home page of this disk. You will then see this window or similar:

Select 'run from current location' and click 'OK'. If your browser only offers to save the file, you should instead run it directly from this CD.
The camera option software will then be loaded on your computer.
An item will be created in your start menu under 'Programs' 'Argus ®' with an icon like this.
Using the Software
Double click the icon or select the start menu item to run the software.
- Plug the lead into Computer
On recent computers the socket is coloured blue.
- Connect the Camera
The socket is under the cover adjacent to the lens, itis accessible without removing the lens bezel.
- Switch on Camera
Wait for the camera to display a normal image.
- The following screen will appear:
- Select COM Port
Select the COM port that the lead is plugged in to on your computer if required. The program defaiults to use COM1 unless changed. If you are not sure try both options.
- Click 'Connect to camera'
The button will disappear and the camera serial number reported on the screen
If a communications error occurs check the camera is switched on, that the lead is connected and that the correct COM port is selected on your PC.
The software offers quick simple access to the image download and time setting functions, these screens are described in detail on page 2.
The detailed functioning of the software is described on page 3.
Return to Index
ARGUS® 3 CD ROM © e2v technologies
Argus® - Trademark licensed from Argus Industries, Inc.